Sanyo Multimedia PLC-XD2600 - Manual (Page 31)

1
Computer Input
Store
To store the adjusted data, select
Store and then press the
Point ► or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
Mode free
To clear the stored data, select
Mode free and then press
the Point ► or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
✔ Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 105i or 1080i is selected in the
PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
Reset
To reset the adjusted data, select
Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Auto PC adj.
Fine sync
Total dots 1365
Horiznotal 0
Vertical 0
Current mode
Clamp 0
Display area H 1024
Display area V 768
Reset
Mode free
Store
0
►
►
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
0
0
Total dots 1344
Horizontal 255
Vertical 34
Display area H 1024
Display area V 768
Where to free?
►
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
store? Store
Total dots
Position H
Position V
Display area H
Display area V
0
0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Free
0
0
Total dots 1344
Horizontal 255
Vertical 34
Display area H 1024
Display area V 768
Where to store?
►
Vacant
Press SELECT button to
store the data.
Press MENU button
to close this dialog
box.
Mode free
Store