Wireless lan connection status, Usage statistics, Wireless lan connection status usage statistics – Sony Ericsson GC79 User Manual
Page 30
30
Wireless Manager Status Screen
When a connection is established, the connection statistics (duration, bytes transmitted, bytes
received) are displayed and updated at regular intervals.
Note:
Statistics display is not supported on Window 98(SE) or Me platforms. To view statistic data
when using these operating systems hover your mouse cursor over the standard Windows
Dial-up Networking icon.
Connection
To connect, cancel or disconnect a GPRS or HSCSD/CSD data session
use the Connect/Disconnect drop down menu. The menu displays all the
connections you have defined, so you can quickly select the required
connection.
The Control button, located underneath the drop down menu, changes
its appearance depending on the state of the GC79 connection. The button
allows you to:
•
Initiate a connection (Connect)
•
Cancel connection attempt (Cancel)
•
Disconnect (Hang-up) an existing session
To create a connection see Create a GPRS, HSCSD or CSD Connection on page 13.
Note:
You can also launch or terminate a CSD dialup networking sessions directly from the Windows
Network Connections icon. A HSCSD networking session initiated outside Wireless Manager
will require some additional settings to be added to your init string, see Appendix D- Initiating
a HSCSD Connection from Outside the Wireless Manager on page 85.
Wireless LAN Connection Status
The right side of the Status screen shows information about your wireless LAN connection, including:
•
Wireless LAN connection status
•
Connection speed
•
Signal strength
•
Network name (SSID)
The Disable/Enable button allows you to switch the wireless LAN radio on and off.
Usage Statistics
Select View
Usage, A dialog displays the total connection time, data received and data sent
for GPRS, CSD/HSCSD and WLAN.
Click the Reset button to zero the counts. You may wish to reset the counters to correspond
with your billing intervals.
Note:
Information in this dialog is indicative and may not correspond to the accurate billing information
maintained by your network operator.