Searching for the last scene of the, Most recent recording (end search), Searching for a scene by date of – Sony GV-HD700E User Manual

Page 33: Recording (date search)

Advertising
background image

33

Bas

ic

Op
erat

ions

3

Press REW m 1.

The tape stops automatically when the
tape counter reaches “0:00:00”.

The tape counter returns to the time
code display, and

disappears.

4

Press PLAY 6.

Playback starts from the point
designated “0:00:00” on the tape
counter.

b

Notes

• There may be a discrepancy of several seconds

between the time code and the tape counter.

• The zero set memory function will not work

correctly when there is a blank section between
recorded sections on the tape.

• During setting the zero set memory function, it

is automatically canceled when you perform the
following operations:
– Pressing MEMORY PHOTO
– Performing the end search
– Performing the index search

z

Tips

• When setting [ZEROMEMORY] to ASSIGN

buttons (p. 36), you can use the zero set memory
function on the VCR without using the Remote
Commander.

To cancel the operation

Press ZERO SET MEMORY 4 again
before rewinding.

Press END SEARCH 8.

The last scene of the most recent recording
is played back for about 5 seconds.

b

Notes

• Once you eject the tape, the end search will not

function.

• The end search function does not function

correctly, if a blank section between recorded
sections on the tape is detected.

z

Tips

• When setting [END SEARCH] to ASSIGN

buttons (p. 36), you can use the end search
function on the VCR without using the Remote
Commander.

You can locate the point where the
recording date changes.

1

Press SEARCH SELECT 2
repeatedly to select [DATE
SEARCH].

2

Press . (previous)/> (next)
5 to select a recording date.

You can select the previous or the next
date of the present point on the tape.

Playback starts automatically from the
point where the date changes.

b

Notes

• The date search functions only with the tape

recorded with date data.

• You need to record more than 2 minutes after

the date is changed. The VCR may not
accurately detect the point where the recording
date changes.

• The date search function will not function

correctly, if a blank section between recorded
sections on the tape is detected.

Searching for the last scene of
the most recent recording (End
search)

Searching for a scene by date of
recording (Date search)

Continued

,

Advertising
This manual is related to the following products: