Sharp AN-CM270 - Manual (Page 10)

INSTALLATION INSTRUCTIONS CEILING BRACKET AN-CM270
FIGURE 14. HINGED
ATTACHMENT PLATE
MAKES SERVICING EASIER
PROCEDURE FOR SERVICING LAMP HOUSING OR AIR FILTER:
A. Remove the knurled thumb screw. See Fig. 14. The projector will swing do wn on the
hinge of the mounting bracket. The bottom of the projector will no w be in a position to
permit servicing the lamp assembly.
B. Proceed to service the air filter or the lamp assembly. Follo w the appropriate
instructions in your projector o wner’s manual.
C. After completing the service procedure swing the projector back up and re-install the
knurled thumb screw.
NOTE: HINGED ATTACHMENT PLATE ALLOWS PROJECTOR TO DROP DOWN FOR EASY
ACCESS TO FILTER AND LAMP HOUSING. SEE PROJECTOR OWNER’S MANUAL FOR
DETAILS OF FILTER OR LAMP REPLACEMENT PROCEDURES.
PAGE 10
Knurled thumb screw