Samsung CLX-8385ND Series - Manual (Page 91)

10.4
<Machine status and advanced setup>
Multi-Bin You can choose the output mode for printouts.
• Mailbox: Printouts are stacked in the bin
you have set. If you set the mailbox to
Bin3, printouts will be stacked in Bin3.
• Job Separator: Printouts are stacked in
the sequence of job order in each bin.
However, if there is a vacant bin left, the
vacant bin has priority, which means
prinouts will be stacked there first.
• Collator: Printouts are stacked in sets to
match the sequence of originals in each
bin.
• Stacker: Printouts are stacked in bins
one-by-one. When Bin1 is full, printouts
will be stacked in Bin2.
Note
You can only use this feature if you
have installed optional 2-Bin Finisher or
4-Bin Mailbox.
Option Description Copy Setup
For copy output, you can set up several options in advance.
1 Press Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK.
3 Press the Setup tab > Copy Setup.
Option Description
Page Number If you select this option On, each copy will include
the page number on the bottom of each page.
Time & Date Set this option On in order to print the date and
time on each copy, set from the General tab.
ID Stamp This option is used to set words or a message
to print on your copies. Set this option On and
an input screen will be displayed, write your
message using the pop up keyboard.
Manual ID Copy
Setup This option sets the ID copy settings such as
the number of images or copying positions
manually. (Page 5.5)