Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 196)

11-12
LANGUAGE
Switches the message display on the LCD.
<Parameter (choice input method)> : Default value
JAPANESE/ENGLISH
LENGTH UNITS
Switches the length unit (millimeter or inch).
<Parameter (choice input method)> : Default value
MILLIMETERS/INCHES
ADMIN PASSWORD
Specifies the administrator password. This password prevents the
settings of the plotter from being changed.
<Parameter (numerical value input method)>
00000000 to 99999999 Default value: 00000000
◆ Write the administrator password down for remembrance
sake. If you should forget the administrator password, the
plotter should be initialized, in which case all the settings
will return to the factory default settings.
Note