Sharp SD-AS10 - Manual (Page 50)

50
SD-AS10
Ad
v
a
nced Features
- Se
tti
ng
t
h
e
t
ime
r -
Setting the timer
Notes:
! When you use the timer to play a DVD with a menu screen, playback stops at the
menu screen.
! If the unit is unplugged or a power failure occurs after timer setting, the clock stops
and the timer setting will be canceled. Set the clock and timer again.
! You cannot use the timer to operate other equipment.
! Timer playback does not start if the unit is turned on at the start time.
The unit starts playback or turns on the radio at a specified time.
This unit has 2 types of timer functions: "once timer" and "daily timer".
Once timer:
Once timer playback works for one time only at a preset time.
Use when...
You want to listen to a radio program on the day.
(After operation, the timer setting is canceled.)
Daily timer:
Daily timer playback works at the same preset time every day.
Use when...
You want to use the timer as a wake-up call, or listen to the radio at the same
time every day.
You can use the once timer and daily timer together.
For example, use the timer as a wake-up call (daily timer), and listen to the
radio later on the day.
1 Set the daily timer (pages 50 - 51).
2 Set the once timer (pages 50 - 51).
Notes:
If both timers are set for the same time, the once timer setting will start.
When using both timers, allow at least 1 minute between operations. Otherwise
the timer used later will not work.
Start
Daily timer Once timer
1 minute or more
Stop Start Stop
Before setting timer:
1 Set the clock (see page 21).
If the clock is not set to the correct time, the timers do not work properly.
2 Prepare a source to play back.
! Insert a disc to play.
! To use the radio for timer playback, store a station (see page 39).