Sony CMT-DV2D - Manual (Page 17)

D
V
D/VI
D
E
O
CD/CD/MP3
/J
PEG –
Pla
y
17 GB
Other operations
Notes
• You cannot perform Program Play with DVDs and
VIDEO CDs with PBC function.
• Program Play is canceled when:
– you turn off the system.
– you open the disc tray.
– you switch to other functions except DVD.
Tip
The program you made remains after Program Play
finishes. To play the same program again, press
DVD N (or DVD NX on the unit).
You can search for a chapter (DVD) and track
(VIDEO CD, CD). As chapters and tracks are
assigned unique numbers on the disc, so you can
select the desired one by entering its number. Or,
you can search for a particular point using the
time code (Time Search).
Searching for a chapter
1
Press TIME SEARCH.
The Search Display appears.
2
Press M or m repeatedly to select
“Chapter”.
3
Press the number buttons to select the
desired chapter number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press ENTER.
Playback starts.
Searching for a track
1
Press TIME SEARCH repeatedly until
the Disc Search Display appears.
2
Press M or m repeatedly to select
“Track”.
3
Press the number buttons to select the
desired track number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press ENTER.
The playback starts from the selected
number.
To Do this
Cancel Program Play Press PLAY MODE
repeatedly in stop mode
until “Continue” appears.
Clear a programmed
step Press M/m/</,
repeatedly to select a step
number, then press CLEAR
in stop mode.
Clear all the
programmed steps Press M/m/</,
repeatedly to select “All
Clear”, then press ENTER.
Using the on-screen
display to search
continued