Sun Microsystems Sun Adapter IP HL 7 User Manual

Page 30

Advertising

▼

Modifying Adapter Properties in the Connectivity Map

From the Connectivity Map, double-click the Adapter icon located in the link between the
TCP/IP HL7 External Application and the Service.

The Adapter Properties Editor appears, and displays either inbound or outbound properties
depending on the link to the Service.

In the explorer panel on the left of the Properties Editor, expand the tree until you see the
category you want to modify and then select that category.

For example, to modify server port binding properties, expand TCPIP Inbound Settings and
then select Server Port Binding.

Modify a property by either selecting a new value from a drop-down list (if available) or by
typing a new value in the property field.

Tip –

Click on the ellipsis button next to a property field to open a separate configuration dialog

box. This is helpful for large values that cannot be fully displayed in the property field. Enter the
property value in the dialog box and click OK. The value appears in the parameter’s property
field.

(Optional) To record notes and information about the currently selected property, click inside
the Comments box in the lower left of the editor and enter the text.

This information is saved for future reference.

When you are done configuring the properties, click OK.

TCP/IP HL7 V2 Adapter Inbound Connectivity Map Properties

The TCP/IP HL7 V2 inbound adapter configuration properties are organized into the following
sections on the Properties Editor accessed from the Connectivity Map:

■

“General Inbound Settings – TCP/IP HL7 V2 Inbound Adapter” on page 31

■

“TCPIP Inbound Settings — TCP/IP HL7 V2 Inbound Adapter” on page 32

■

“TCPIP Inbound Settings - Server Port Binding — TCP/IP HL7 V2 Inbound Adapter” on

page 35

■

“TCPIP Inbound Settings - Client Connection Establishment — TCP/IP HL7 V2 Inbound

Adapter” on page 35

■

“TCPIP Inbound Settings - Inbound Connection Management — TCP/IP HL7 V2 Inbound