Hl7 msh segment — tcp/ip hl7 v2 inbound adapter – Sun Microsystems Sun Adapter IP HL 7 User Manual

Page 41

Advertising
background image

TABLE 10

Connectivity Map - Lower Layer Protocol

(Continued)

Name

Description

End Data Character

The second to the last envelope marker character in the HL7 envelope, as a
decimal ASCII number. Enter a number from 1 to 127. Unless there is a conflict,
the value should be ASCII FS (decimal 28).

End Block Character

The last envelope marker character in the HL7 envelope, as a decimal ASCII
number. Enter a number from 1 to 127. To strictly comply with the HL7
Standard, this property must be set to a carriage return (decimal 13).

HLLP Checksum Enabled

An indicator of whether the HLLP Checksum is enabled or disabled.

Select true to enable checksum values; otherwise select false.

Max Number of Retries

The maximum number of times the adapter tries to send a message upon
receiving the MLLP v2.0 Negative Commit Acknowledgement from the peer
before giving up. This property is used by the adapter in outbound mode. Enter
any integer.

Sequence Number Protocol — TCP/IP HL7 V2 Inbound
Adapter

The following table lists and describes the property that appears on the Sequence Number
Protocol page of the Properties Editor accessed from the Connectivity Map. This property
enables or disables HL7 sequence numbering, which is used to help prevent duplication of data.

TABLE 11

Connectivity Map - Sequence Number Protocol

Name

Description

Sequence Number
Enabled

An indicator of whether sequence numbering is enabled or disabled. Enabling
sequence numbering helps prevent duplication of data. Select true to enable
sequence numbering; otherwise select false.

HL7 MSH Segment — TCP/IP HL7 V2 Inbound Adapter

The following table lists and describes the properties that appear on the HL7 MSH Segment
page of the Properties Editor accessed from the Connectivity Map. These properties define the
configuration of the MSH segment of the HL7 message. For more information about this
segment, refer to the HL7 specification (

http://www.hl7.org

).

TCP/IP HL7 V2 Adapter Inbound Connectivity Map Properties

Sun Adapter for TCP/IP HL7 User's Guide

41

Advertising
This manual is related to the following products: