Drc (dynamic range compression), Av-sync, Hdmi audio – Samsung HT-C455 User Manual

Page 25

Advertising
background image



English

English



03

Setup

Ideal Centre
Speaker placement

Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker

Place all speakers within this circle.

Ideal Rear
Speaker placement

Setting the Centre Speaker

If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.

Distance

between

Df and Dc

0.00m 0.34m 0.68m 1.06m 1.40m 1.76m

Delay

Time

00 ms 01 ms 02 ms 03 ms 04 ms 05 ms

Setting the Rear Speaker

If the distance of Dc is equal to or longer than the
distance of Dr in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.

Distance

between

Dr and Dc

0.00m 1.06m 2.11m 3.16m 3.62m 5.29m

Delay

Time

00 ms 03 ms 06 ms 09 ms 12 ms 15 ms

NOTE

With

PL II (Dolby Pro Logic II), the delay time

may be different for each mode.
With AC-3 and DTS, the delay time can be set
between 00 and 15mSEC.
The Centre channel is only adjustable on 5.1
channel discs.

`

`

`

Test Tone

Settings

Move

Select Return

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone

: On

Select

Return

Use the Test Tone feature to check the speaker
connections.

Press the _+ buttons to select ON.
The test tone will be sent to Front Left ➞ Center

Front Right ➞ Rear Right ➞ Rear Left ➞

Subwoofer in order.
To stop the test tone, press the ENTER button.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.

You can select either off, 2/8, 4/8, 6/8, Full

AV-SYNC

Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video

You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.

HDMI AUDIO

The audio signals transmitted over the HDMI Cable
can be toggled On/Off.

On : Both video and audio signals are transmitted

over the HDMI connection cable, and audio
is output through your TV speakers only.

Off : Video is transmitted over the HDMI

connection cable only, and audio is output
through the product speakers only.

~
~

~

~

~

~

Advertising
This manual is related to the following products: