Sharp AR-BC320 - Manual (Page 134)

SPECIFICATIONS
8-4
Reversing automatic document feeder
Duplex bypass/inverter unit (optional)
Original sizes 5-1/2" x 8-1/2" to 11" x 17" (A5 to A3)
Original weight One-sided original : 14 to 54 lbs. (50 to 200 g/m 2 )
Two-sided original : 14 to 42 lbs. (50 to 156 g/m 2 )
Capacity Up to 100 sheets (8-1/2" x 11", 21 lbs. (A4, 80 g/m 2 ))
Up to 60 sheets (8-1/2" x 14" or larger, 21 lbs. (B4 or larger, 80 g/m 2 ))
For originals heavier than 21 lbs. (80 g/m 2 ), the total thickness must not exceed
13/32" (10 mm). However, for originals that are larger than 8-1/2" x 14" (B4), the
total thickness must not exceed 1/4" (6 mm).
Power supply Supplied from machine
Dimensions 32-3/8" (W) x 20" (D) x 4-13/16" (H) (822 mm (W) x 508 mm (D) x 121 mm (H))
Weight Approx. 26.5 lbs. (Approx. 12 kg)
Number of sheets 1 sheet (non-stack method)
Paper size Face-up output: Same as paper feed specifications of machine
Face-down output: 12"x18", 11"x17", 8-1/2"x14", 8-1/2"x13", 8-1/2"x11", 8-1/2"
x11"R, 7-1/4"x10-1/2"R, 8-1/2"x5-1/2", A3W, A3, B4, A4,
A4R, B5, B5R, A5
Page weight Face-up output: 17 to 80 lbs. (64 to 300 g/m 2 )
Face-down output: 17 to 54 lbs. (64 to 200 g/m 2 )
Transport reference point Center reference point
Dimensions 6-5/32" (W) x 17-29/64" (D) x 17-1/64" (H)
(156 mm (W) x 443 mm (D) x 432 mm (H))
Weight Approx. 14.3 lbs. (Approx. 6.5 kg)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
WhaleII_general-copy_SEC.book 4 ページ ２００４年９月１４日 火曜日 午前１１時４５分