Sanyo 32LM5R - Manual (Page 9)

Ver. Page 8
6.4 Operation Requirements
When the TV ’s status in this below, Functional Execution Commands are limited.
TV Status Available Functional Execution Commands
Standby Mode POWER ON
Power Save Status POWER ON
Note) When the status is above, even if the TV receives other command, it returns [ACK] [CR].
6.5 POWER ON Command
Command “C00” [CR]
Detail
Power ON.
When already Power ON, no operation is necessary.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.6 POWER OFF Command
Command “C01” [CR]
Detail
Power OFF (Standby).
When already standby mode, no operation is necessary.
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.7 Wide “Auto” direct Command
Command “C23” [CR]
Detail
Set wide mode to “Auto” directly.
When PC mode or AV2 RGBHV mode, no operation is necessary
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.8 Wide
“Natural” direct Command
Command “C24” [CR]
Detail
Set wide mode to “Natural” directly.
When PC mode or AV2 RGBHV mode, no operation is necessary
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]
6.9 Wide “Zoom 16:9” direct Command
Command “C25” [CR]
Detail
Set wide mode to “Zoom 16:9” directly.
When PC mode or AV2 RGBHV mode, no operation is necessary
Response
Acceptable [ACK] [CR]
Unacceptable “?” [CR]