Sony DVP-NS710H - Manual (Page 41)

Addi
tion
al
I
n
fo
rm
at
io
n
41 US
Your TV automatically turns on or the TV’s
input is switched to the player.
, “CONTROL FOR HDMI” is set to “ON”
(page 38). Switch this function to “OFF”.
Display language on the screen switches
automatically.
, When “LANGUAGE FOLLOW” is set to
“ON” in the “HDMI SETUP” (page 38), the
display language on the screen
automatically switches, according to the
language setting of the connected TV, if you
change the language settings on your TV,
etc.
USB (DVP-NS728H only)
The player does not detect a USB device
connected to the player.
, The USB device is not securely connected
to the player (page 17).
, The USB device or a cord is damaged.
, Disc mode has not been switched to USB
mode.
, Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or
interrupted audio or may not play at all.
Self-diagnosis Function
(When letters/numbers appear on the
screen)
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen. In this case, check the
following table.
First three
characters of
the service
number Cause and/or corrective
action
C 13 The disc is dirty or recorded
in a format that this player
cannot play (page 42).
, Clean the disc with a
cleaning cloth or check its
format.
C 31 The disc is not inserted
correctly.
, Re-insert the disc
correctly.