Sony SLV-D251P - Manual (Page 56)

56 Screen Setup
To set the “Progressive” setting
If your TV accepts progressive (480p) format signals, you will enjoy accurate color
reproduction and high quality image.
1 Follow step 1 and 2 on page 54, then press V/v to
select “Progressive.”
2 Press B/b to select “On,” then press ENTER.
3 Follow the instructions appearing on the screen.
1 Ensure your TV is (480p) Progressive Scan
capable.
2 Connect with Component Video Output jacks
(red/green/blue connections).
See “Use this hookup if your TV has component
video input jacks” on page 51.
3 Press B/b to select [OK] to test your video
signal.
4 If video signal appears OK, video connection is
complete. Press ENTER.
The PROGRESSIVE indicator on the unit lights up
in orange.
If picture is distorted, press O RETURN.
Check the connection (page 51).
5 Press SET UP to exit the menu.
Black Level
TV Type
Progressive
RETURN
SCREEN SETUP
SET UP v V b B
[ Off ]
[ Off ]
[ 4:3 Letter Box ]
Black Level
TV Type
Progressive
RETURN
SCREEN SETUP
ENTER SET UP v V b B
[ On ]
[ Off ]
[ 4:3 Letter Box ]
Progressive Scan Output
1) Ensure your TV is (480P) Progressive
Scan capable.
2) Connect with Component Video Output
jacks. (red/green/blue connections)
3) Select [OK] to test your video signal.
4) If video signal appears OK,
video connection is complete.
RETURN
SCREEN SETUP
ENTER SET UP b B
OK CANCEL
TEST SCREEN
SCREEN SETUP
If picture is OK, press [ENTER] key
If picture is distorted, press [RETURN] key.
To Deactivate
Press [PAUSE] on the unit for 5 seconds.
RETURN
SCREEN SETUP
ENTER
Black Level
TV Type
Progressive
RETURN
SCREEN SETUP
SET UP v V b B
[ On ]
[ Off ]
[ 4:3 Letter Box ]