Sanyo VCC-WB2000P - Manual (Page 35)

CAMERA Settings
5
BRIGHT
This lets you set the image brightness to one of
five settings.
Setting range: 1 to 5 (Default: 3)
Note: The larger the setting, the brighter are the
images.
6
ELECTRONIC SHUTTER
This setting is used when IRIS is set to “AI”.
Setting range: 1/60, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000
7
BLC (backlight compensation)
Available settings:
•
OFF: Backlight compensation is not carried
out.
•
MULTI (multiple point photometry):
Backlight compensation is calculated from
the whole image to obtain correct images.
•
CENTER (center focus photometry):
Backlight compensation is calculated based
on the center of the image to obtain correct
images.
8
WHITE BALANCE
Available settings:
•
AUTO (automatic white balance): The
white balance is adjusted automatically to
obtain correct colors even if the light source
changes.
•
INDOOR: This setting is for when the
camera is being used indoors under
fluorescent lighting.
•
OUTDOOR: This setting is for when the
camera is being used outdoors under natural
sunlight.
•
MANUAL (manual white balance): This
lets you make manual fine adjustments to
the white balance. It can be used when the
“AUTO” setting does not give correct color
reproduction.
☞
Setting manual white balance (MANUAL)
Click the and buttons repeatedly to
adjust the settings for R (red) and B (blue).
Setting range: 0 to 255
Note: The red or blue component becomes
stronger when the setting is higher.
9
AGC Gain
If the images are too dark, change the maximum
[AGC Gain] value to make the images lighter.
The default setting is “0”.
Available settings:
OFF: AGC is not used.
–6 dB, 0, +6 dB, +9dB
F
GAMMA
Select a value that is suitable for the monitor
being used.
Setting range: 1, 0.8, 0.6, 0.45, 0.3
G
[PRESET] button
Click this button to return all settings to their
factory defaults. The preset confirmation dialog
box will be displayed. Click the [OK] button to
return the values to their factory defaults.
ID3 ID2
– 34 – English