Spectra KT2038 - Manual (Page 10)

INTRO, PROGRAM & RANDOM PLAY
INTRO
Plays the first 10 seconds of each track on the disc.
1. In STOP mode press the MODE button three times,
INTRO is displayed.
2. Press button to start INTRO play from track number 01.
3. If INTRO mode is selected during play, INTRO will start flashing in the display.
• Press button. INTRO stops flashing and INTRO play starts from track 01.
• Press to start INTRO play from next track.
• Press twice to start INTRO play from previous track.
• To cancel INTRO play, press button again. Playback starts from current
track.
PROGRAM
This allows the selected tracks on the disc to be played in any desired order
NOTE: Programs can be set either in the play mode or in the STOP mode.
1. Press the PROG button when the unit is in the stop
mode.
The track number “00” will appear in the display
with the indicator flashing.
2. Press or to select the desired track.
3. Press the PROG button to enter the track into the
memory. Track number returns to “00” and program
channel No. changes to 02.
4. Repeat step 2 and 3 to program up to 20 tracks
into the memory.
5. Press to start the programmed play.
6. To erase the program, press the STOP button
twice once in STOP mode.
RANDOM
Enables all the tracks on a disc to be played in a Random sequence.
1. In STOP mode press the MODE button four times,
2. Press button. A track is selected at random and
will begin to play.
3. If RANDOM mode is selected during play, RAND will start flashing in the display.
Press or button. RAND stops flashing and RANDOM
playback begins.
4. Press MODE Button again to return to normal play mode.
10
ESP
ESP
ESP