Sony DVP-NC665P - Manual (Page 74)

74
Specifications
System
Laser: Semiconductor laser
Signal format system: NTSC
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) jack only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO)
jack are measured. When you play PCM
sound tracks with a 96 kHz sampling
frequency, the output signals from the
DIGITAL OUT (COAXIAL or OPTICAL)
jack are converted to 48 kHz sampling
frequency.
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT L/R (AUDIO) : Phono jack/
2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL) : Optical
output jack/–18 dBm (wave length:
660 nm)
DIGITAL OUT (COAXIAL) : Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
B
, P
R
) :
Phono jack/Y: 1.0 Vp-p/P
B
, P
R,
:
0.65 Vp-p/75 ohms
LINE OUT (VIDEO) : Phono jack/
1.0 Vp-p/75 ohms
S VIDEO OUT : 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.286 Vp-p /75 ohms
General
Power requirements:
120 V AC, 60 Hz
Power consumption: 15 W
Dimensions (approx.): 430
Ч
95.5
Ч
409 mm
(17
Ч
3 6 /
8
Ч
16 1 /
8
in.) (width/height/depth)
incl. projecting parts
Mass (approx.): 5.1 kg (11 lb 4 oz)
Operating temperature: 5
°
C to 35
°
C
(41
°
F to 95
°
F)
Operating humidity: 25 % to 80 %
Supplied accessories
See page 15.
Specifications and design are subject to
change without notice.
E
NERGY
S
TAR R is a U.S. registered mark.
As an
E
NERGY
S
TAR R Partner, Sony
Corporation has determined that this product
meets the
E
NERGY
S
TAR R guidelines for
energy efficiency.