Sierra Wireless 580 - Manual (Page 22)

22
Ready Service is available
No Service No service is available
Connecting Attempting to make a connection
Connected 1 xEV-DO
or
Connected 1xRTT
A connection is established
(1xEV-DO or 1xRTT - active or
dormant)
Dormant / Connected A connection is established but no
data transfer is in progress
Disconnecting Disconnecting the current call
Cal l Lost Call is dropped; transient state
returning to Ready
Card is Locked The modem security feature has
been enabled
Connection timer
The connection timer displays the duration of the current data call and begins as soon as a connection
is established. The time format is 00hrs: 00min: 00sec.
Byte counter
The byte counter displays the amount of data transmitted and received during a session as soon as a
connection is established. The measurements are listed in kilobytes and megabytes.
For 0-999 kilobytes, the format is displayed as: “ XXX kB” (i.e. 7 kb, 68 kB, or 768 kB). For 1 megabyte
and up, the format is displayed as: “ XXX.X MB” (i.e. 1.0 MB, 3.2 MB, or 132.3 MB).