Sony Ericsson IIDA G11 - Manual (Page 15)

13
Getting Ready
Use j to select (Accept) and then
press c (Select).
Use j to select the entry box, press c (Input),
enter an e-mail address using single-byte
alphanumeric characters, and then press
c (OK).
For details on entering e-mail addresses, see page 23.
Use j to select (Send) and then press
c (Select).
Use j to select OK, press c (Select) and
then c (OK).
Check that the e-mail address has been updated
before pressing c (OK).
Your e-mail address cannot be changed if the new
address you enter in the above procedure is already
being used. In this case, enter a different e-mail
address.
•
•
•
Changing Your E-mail Address
You can change the account
name of your e-mail address.
When the standby screen is displayed, press L.
Use j to select E-mail Setup and then press
c (Select).
Use j to select Other and then press
c (Select).
The cell phone connects to the server.
Use j to select (Change
E-mail Address) and then press c (Select).
Use j to select the entry box, press c (Input),
enter your security code, and then press c (OK).
Your security code is the four-digit number you wrote
on your subscription form.
If the security code is incorrectly entered three times
consecutively during a single day, the e-mail address
change operation will be disabled until the next day.
Use j to select (Send) and then press
c (Select).
•
•
@ezweb.ne.jp
Account name Domain name
E-mail address
@ezweb.ne.jp
Account name Domain name
E-mail address