Speed Queen LES37A*F - Manual (Page 25)

23 510988 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
Before Drying
Energy Saving Tips
● Make sure the lint filter is always clean.
● Do not overload the dryer.
● Do not overdry items.
● Remove items to be ironed while still damp.
● Use the correct cycle for the type of fabric being
dried.
● Do not open the door during the drying cycle.
● Plan to do your laundry on low humidity days;
your clothes will dry faster.
● Dry multiple loads of clothes one right after
another so dryer interior does not have to be
reheated for each load.
Helps and Hints
● The necessary suggestions and directions for
installation and proper exhausting are given in
the beginning of this manual.
● Static electricity may cause garments of synthetic
fibers (as in lingerie) to cling together, especially
if they are overdried. The use of a fabric softener
will soften clothes and reduce static electricity.
● Do not wash or dry clothes that shed lint in the
same load with permanent press or knit garments.
● Remove permanent press loads immediately after
dryer stops.
● Follow the care labels on FLAME
RETARDANT, SCOTCH-GUARD™, etc.,
garments for the proper washing and drying.
● If loads should be damp for ironing, turn timer
knob to the ENERGY SAVER setting, marked
with a dot (
•), in Automatic or Time Dry cycles.
Load
Do not overload your dryer. Bulk, not weight,
determines the load size. There should be space in the
dryer for the clothes to tumble freely. Large and small
pieces together make up loads which will tumble well.
Permanent press loads should be smaller to provide
room for tumbling. Figure 15 shows the ideal load
sizes for fabrics.
Figure 15
To reduce the risk of fire, explosion, serious
injury or death, clothes which have traces of
any flammable substances such as cooking
oil, machine oil, flammable chemicals,
thinner, etc. must not be put into the dryer.
W131
WARNING
D665IE0A
D666IE0A
D665IE0A
CYLINDER WITH WET COTTONS AND
LINENS
D666IE0A
CYLINDER WITH WET
PERMANENT PRESS