Using flash in each recording mode of the camera – Sony HVL-F43AM User Manual
Page 25
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\050C02.fm
Master: Right
Ba
si
cs
25
Using flash in each recording
mode of the camera
If the camera is set to aperture priority (A mode), shutter speed priority (S mode) or
manual exposure mode (M mode), TTL flash photography can be performed
according to the mode.
1
Select A, S or M mode on the camera.
2
Press the MODE button to display [ ].
• Fill-flash is selected.
3
Set the aperture and/or shutter speed according to the
mode you select, and then focus the subject. See the
table below.
Recording mode of the camera
Settings
A (Aperture priority flash
photography)
Set the aperture.
• Reduce the aperture (i.e. increase the f-
stop) to reduce the flash range, or open
the aperture (i.e. reduce the f-stop) to
increase the flash range.
• The shutter speed is set automatically.
S (Shutter speed priority flash
photography)
Set the shutter speed.