General settings — psm, Basic procedure, English – JVC KD-G511 User Manual
Page 22
22
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When you select “DIMMER”
3
Adjust the PSM item selected.
4
Repeat steps
2
and
3
to adjust the
other PSM items if necessary.
5
Finish the procedure.
Indications
Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF: Cancels.
CLOCK H
Hour adjustment
0 – 23 (1 – 12), [8]
[Initial: 0 (0:00)]
CLOCK M
Minute adjustment
00 – 59, [8]
[Initial: 00 (0:00)]
24H/12H
24 hours or 12 hours time
display
12H
O 24H, [8]
[Initial: 24H]
CLK ADJ
Clock adjustment
AUTO:
[Initial]; The built-in clock is automatically adjusted
using the CT (clock time) data in the RDS signal.
OFF:
Cancels.
EN18-23_G612[EX_EU]1.indd 22
EN18-23_G612[EX_EU]1.indd 22
10/26/04 8:58:04 PM
10/26/04 8:58:04 PM