I/o time setup, English _ 29, Output port setting table – Samsung SSA-S2000 User Manual
Page 29
English _ 29
I/O TIME SETUP
Output Port Setting Table
You must specify the port settings using whatever combination of the followings if you want the device to operate in
Secure mode or normal + Secure mode.
Port
Setting Value
Example
Operation mode setting value
EX 1)
If only the door relay operates in normal and
Secure modes
Normal and Secure modes: 50
Door Relay: +01
Output Port Setting Value: 51
EX 2)
If the alarm relay and the TTL output operate in
Secure mode
Secure Mode: 00
Alarm Relay, TTL: +06
Output Port Setting Value: 06
Operate only in Secure mode
00
Operate in normal mode and Secure mode
50
Operation port setting value
Operate the door relay only
01
Operate the alarm relay only
02
Operate the TTL output only
04
Operate the door relay and TTL output
05
Operate the alarm relay and TTL output
06
TO SPECIFY THE OUTPUT TIME IF THE CARD IS AUTHENTICATED
You can specify the output time if the card ID is authenticated.
When the card ID is authenticated, the door relay and the TTL output operate for a set time.
Present the Master Card to the device.
Press Button
2
and Button
1
in sequence and press
ENT
.
Enter the two-digit door open time and press
ENT
.
Specify the two-digit TTL output time and press
ENT
.
For instance, if you set the door open time to “03” and TTL to “00”, the
door relay operates for 3 seconds for an authenticated card ID.
By default, the door relay operates for “03” seconds while the TTL
output works for “00” second in normal and Secure modes.
You can specify from 10 to 99.
❖
1.
2.
3.
4.
•
•
•
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW
tGj
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW
I/O time setup