SUUNTO X9_en. - Manual (Page 53)

51
Altitude difference (dif): Displays the altitude difference
between your current location and the next waypoint in the
unit of your choice.
Altitude to finish (atf): Displays the total amount of ascent
from the current location to the last waypoint in the unit of your
choice.
Speed (spd): Displays the speed in the unit of your choice.
Heading (hea): Displays the heading in degrees.
Cross track error (xte): Displays the deviation from the
course (left/right).
3.5.8. Track Back (Active track)
The Track Back function starts the navigation along the currently active track log to the
starting location.
To activate the Track Back function:
1. In the Set menu, select Track Back with UP/DOWN and
press ENTER. The message ‘
START TRACK BACK
?’ is
displayed.
2. Press ENTER to confirm the selection. Suunto X9 takes
you to the Navigation mode’s main display and activates
the navigation to the starting location. The Track Back
functions just like the navigation, with the exception that you
cannot view additional data displays. The destination is
displayed on the top row.
3. To stop the Track Back navigation, choose as the navigation option, as the
activity option or turn off the GPS in the Function Menu.
NOTE: Starting the Track back function activates a new track log file.
NOTE: To view the total distance to the starting location, select dtf as a shortcut (see
section 3.6.6.).