Shure I3C User Manual

Shure Headphones

Advertising
background image

I3c

Sound Isolating Earphones

These sound-isolating earphones

with VoicePort inline microphone

connect to both your cell phone

and portable media player. The

inline control switch allows you to

easily transition from listening to
music to answering phone calls.

WideBand MicroDrivers deliver an

extended frequency soundstage

that you can now enjoy at low

listening levels, even in noisy

environments.

INSERTING THE EARPHONES

WEARING THE EARPHONES

CHOOSING AN EARPHONE SLEEVE

Your earphones come with a selection of sleeves. Make sure the sleeve you
use is easy to insert into your ear, fits comfortably, and is easy to remove from
your ear.

Warning: Do not push the earphone sleeve
beyond the ear canal opening.
Make sure that the sleeve completely covers
the earphone nozzle. If any part of the
nozzle is exposed, the sleeve is not properly
installed.

When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.

Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Foam Sleeves

Triple-Flange Sleeves (Optional Accessory)
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.

Nozzle

Wax Removal Loop

When cleaning, do not force any object through the earphone nozzle!
This will damage the earphone sound filter.

©2005, Shure Incorporated
27EN3210 (Rev. 2)

Printed in U.S.A.

Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.

Over the ear

in front

INLINE SWITCH CONTROL

Push and hold to MUTE cell phone microphone

Volume

Audio Source:

cell phone

media player

Note: Turn volume control to its lowest setting before switching
between music and cell phone. Switching to media during a call
mutes cell phone.

CLEANING THE EARPHONE NOZZLE

If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.

Left

right

Wear the earphones as illustrated below.

If the earphone seems to be lacking in low frequency response (bass), check
the tightness of the seal between the earphone and your ear, or try one of the
other sleeve options.

Advertising