Silvercrest SMW 800 A1 - Manual (Page 9)

- 7 -
Description of the appliance
1 Display
2 Door opener button
3 Glass plate
4 Star rotator
5 Cold air intake
6 Grill Button
7 Weight/Amount Button
8 Defrosting button
9 Time Button
0 Stop button
q Control dial/Start/Quickstart
w Kitchen timer button
e Combination Button
r Operation button
t Grill stand
Commissioning
Installation of the appliance
Warning:
This microwave oven is not suitable for installation in
a kitchen cabinet. In closed cabinets sufficient ventilation
for the appliance cannot be assured. The appliance
could be damaged and there would be the additional
risk of a fire!
• Select an even surface offering sufficient space
for the adequate ventilation of the appliance:
Ensure that you maintain a minimum distance
of 10 cm from neighbouring walls/surfaces.
Ensure that the door of the microwave oven
can be opened easily.
Maintain a gap of at least 20 cm above the
microwave oven.
• Ensure that the electrical plug is accessible
without problem, so that in case of danger it
can be easily reached and removed.
• Do not remove the pads underneath the micro-
wave oven.
• Do not block the ventilation slots 5. If you do,
it could damage the appliance.
• Install the appliance as far away as possible
from radios and televisions. The operation of
the microwave oven can cause malfunctions to
radio and televsision reception.
Warning:
Do not install the microwave above a cooker or any
other appliance generating heat. Installation in such
a location could cause damage to the appliance and
lead to a subsequent cancellation of the warranty
provisions.
Preparing the appliance
• Remove all packaging materials and any
protective film on the surface of the housing.
Note:
Do not remove the light grey flimmer cover plate,
which is mounted in the cooking area to protect
the magnetron.
• Insert the plug into a power socket.
Use a 230 - 240 V, 50Hz, mains power socket
with a 16A fuse. It is recommended that the
microwave oven is powered from its own ring
main. If you are unsure about how to connect
the microwave oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.