User instructions, 2 washing programs – Smeg 3LBA500 User Manual
Page 13
3.2 Washing programs
The dishwasher is equipped with a control panel, described in chapter
"1. Description of the controls", from which it is possible to carry out all
the power switch-on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
When the ON/OFF button (1) is pressed, the dishwasher switches on.
The ON/OFF (2) and START/PAUSE (4) lights will indicate one of the
following states:
Program start
Dishwasher ready to execute a new program.
Program end
Door closed and washing program over.
Alarm
Alarm state (see chapter "Troubleshooting").
1
9
3
5
4 2
8
1
9
3
5
4 2
8
6
7
14
User instructions