Sony DVP-NS47P - Manual (Page 18)

18 US
B
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
If your TV accepts progressive 480p format signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT)” in “SCREEN SETUP” to “ON” (page 61) to output
progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 60.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player TV
Connect
directly