4 static, 1 ddns on/off, 2 port – Speco Technologies DVR-T4IP User Manual
Page 54: 3 ip address, 4 subnet mask, 5 gateway, Static, Ddns on/off, Port, Ip address
Advertising
54
3.6.4 Static
Figure 3-28 Static Network setting
3.6.4.1 DDNS
On/off
3.6.4.2 Port
Configure the Port number to be used to connect to the DVR system using RAMS (Remote
Access & Monitoring System). The default Port number is port 80. Change easily by using
Jog/shuttle equipped in front panel.
3.6.4.3 IP
Address
Assign a fixed IP address to the DVR. Change easily by using Jog/shuttle equipped in front
panel.
3.6.4.4 Subnet
Mask
Assign the Subnet Mask. Change easily by using Jog/shuttle equipped in front panel.
3.6.4.5 Gateway
Assign the Gateway address
Change easily by using Jog/shuttle equipped in front panel.
Advertising