Servis-Rhino 1900 - Manual (Page 146)

MAINTENANCE
1900 07/10 Maintenance Section 5-2
© 2010 Alamo Group Inc.
MAINTENANCE
LUBRICATION
General
Grease all locations shown daily.
PTO SHAFT INSPECTION
1.
Regularly check the PTO guards for damage and ensure the anti rotation chains are in place and that their
anchor points are in good condition. Do not operate the machine with any damaged guards - replace suspect
items immediately.
PTO SHAFT LUBRICATION
2.
Lubricate all the points indicated in the diagram below at the intervals stated using a general purpose
lithium based grease.