Seagate Fibre Channel Interface - Manual (Page 78)

64 Fibre Channel Interface Manual, Rev. D
Service Options
These bits are only checked for class 3 service parameters. The drive returns an LS_RJT to PLOGI requests that do not
satisfy the drive’s requirement.
Categories per Sequence
The drive does not check the Categories per Sequence bits in the PLOGI. The
drive originates only one category per sequence. The drive returns 00 in the
PLOGI ACC to indicate it only supports receiving one category per sequence.
Table 29: Service Option fields
Option Drive requirement
Class Valid Must be a one (1).
Intermix Mode Not applicable. Not valid for class 3.
Stacked Connect Request Not applicable. Not valid for class 3.
Sequence Delivery Not applicable. Valid only for Fabric login.
Table 28: Recipient Control fields
Option Drive requirement
26