Spirit CU800 - Manual (Page 20)

0 0 8 U C _ 0 0 8 R C
19
CR800 & CU800 Console
Power on
Spirit commercial bikes have a built-in generator for power and do not need to be plugged into an
AC outlet. To power up the Bike simply start to pedal, the console will turn on automatically.
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on for a short time. When the lights go off the dot matrix display will show a software
version (i.e. VER 1.0) and the message window will display an odometer reading. The odometer
reading displays how many hours the bike has been used and how many virtual miles the bike has
gone. The display shows: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles, showing the programs,
and the message window will be scrolling the start up message. You may now begin to use the
console.
Operation of Your Stationary Bike