Sanyo DSR-M800 - Manual (Page 22)

21
7
PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION)
Follow the steps below to set the key lock function,
preventing accidental pressing of the operation buttons.
1
With the digital video recorder
recording or stopped, press the [
]
button for about 3 seconds.
When the key lock is set, a confirmation tone sounds, and
the LOCK/REMOTE indicator lights.
z The key lock setting is not released at power OFF.
z You cannot set the key lock during playback.
1
With the key lock function set, press the
[
] button for about 3 seconds.
When the key lock is released, a confirmation tone sounds,
and the LOCK/REMOTE indicator goes out.
z When the key lock function has been set, the buttons
can’t be used for settings or operations.
z When the security lock is set, you cannot set the key
lock alone.
z If you have already set the security lock, the password
entry screen appears. (JP.36)
ALARM
REC/STOP
LOCK/REMOTE
USB
POWER
SEARCH
MENU RESET
MENU REVIEW CUE EXIT/OSD
PLAY/
STOP
STILL
TIMER
FULL
LAN (LINK/ACT.)
[ ] button
Setting the key lock function
Releasing the key lock function
e_dsr_m800.book Page 21 Friday, January 31, 2003 5:45 PM