Pc input, Pc setting, Pc picture and sound – Sanyo DP50740 User Manual

Page 17: Laptop display

Advertising
background image

17

Need help?

www.sanyoctv.com 1-800-877-5032

PC INPUT

PC Setting

Auto Adjustment – Automatically adjusts display
position, dot clock and phase.

Dot Clock – Adjust the Dot frequency to match
your computer’s Dot frequency.

Phase – Adjust this parameter when the picture
appears to flicker or is blurred.

H-Position – Move the image horizontally

V-Position – Move the image vertically

Power Saving – Enable the HDTV to turn to
Standby Mode when computer is not in use.

PC Picture and Sound

Standard – Sets predetermined values to the
Picture or Sound parameters.

Manual – Adjust Contrast, Brightness, and Color
Temperature
screen settings, and the Bass and
Treble audio settings.

NOTE: These settings do not affect normal TV viewing.

Laptop Display

When using your Sanyo HDTV to display a
Laptop’s screen display, holding down the Fn (or
FN) key while pressing the appropriate function
key (F5, F7, F8, etc) should cycle through different
display modes between the laptop and the HDTV.

Modes may include displaying only on the laptop
screen, on both the laptop and the HDTV, or
displaying only on the HDTV.

NOTE: Fn key and function key symbols on the laptop’s

keyboard may vary from one brand to another.

Hold down

and press

Before connecting any cables, disconnect the
AC power cords of both the HDTV and PC from
the AC outlets.

Power on the HDTV and any other peripheral
equipment before powering on the computer.

To avoid an “Out of Range” condition please set
your PC’s output resolution to one compatible with
your HDTV. See PC Resolution chart on page 3.

Use your HDTV as a computer monitor by hooking
up your PC or Laptop to the TV with the use of an
appropriate monitor cable (not included.)

HDTV BACK

PC OR LAPTOP

RGB Monitor

cable

DVI OUTPUT

JACK

RGB OUTPUT

JACK

Sanyo recommends using
a monitor cable that
includes a Ferrite Core.

Stereo mini

audio cable

NOTE: If computer has only DVI Output, a DVI to RGB

adapter will be required, or, a DVI to HDMI cable
and RCA audio cables (see HDMI (DVI) INPUT1 on
page 7.)

PC PICTURE AND SOUND SCREENS

PC SETTING SCREEN

Advertising