Snom M3 - Manual (Page 28)

english
© snom technology AG 2007 •
28
1) Press the ok key. the Firmware update menu
appears.
2) to update to the latest version, choose the
update listed on the simple tab, press the
ok key, and then press the Yes soft key when
prompted wether you want to update the sys-
tem. if you press the view soft key before you
start the installation, you can find out about
the software version number and the date and
time it was released.
3) select (if available) language and press ok.
the update time varies depending on the size of
the update and the speed of your internet con-
nection. During the update process the following
steps are listed in the display:
• Getting gateway
• Updating gateway
• Getting handset
• Updating handset
once a step is complete, a green checkmark
appears next to the step. When the entire update
has been successfull y completed, the display
reads “Upgraded to <version number>”.
note: While the update is in progress you cannot receive
incoming calls or make calls, including emergen cy calls, on
the
. Also note that we recommend that you do not
reset the gateway during the installa tion process.