Samsung SCC-ZM395N - Manual (Page 17)

Version 1.1
- 17 -
● DNR (Digital Noise Reduction)
Reduces the noise on the screen. This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER.
This module use the motion adaptive DNR algorithm. This is mixed 2D & 3D method data
depends on motion.
● SHUTTER
The SHUTTER menu is used to set the fixed high-speed electronic shutter, auto high speed
electronic shutter and external high speed electronic shutter(EXT).
You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high speed
electronic shutter, which is mostly used for imaging a fast moving object.
※ As long as SENSE UP is set to AUTO, FIXED / FLICKERLESS to ON / BACKLIGHT
to WDR, the SHUTTER menu is not available.
● SENS-UP (Low Speed shutter)
Automatically detects the ambient level of darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image bright and sharp; It can be also used as
FIX mode.
※ If the SHUTTER menu is set to fixed electronic shutter mode, the SENSE UP menu
will not be available.
If FLICKERLESS is set to ON, or BACKLIGHT to WDR, the FIX mode of the SENSE
UP menu is not available.
● FLICKERLESS
If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will prevent
possible screen distortion due to a mismatch between the vertical sync frequency and the
blinking frequency of the lighting.
※ If SHUTTER is set to FIX, SENSE UP to FIX, and AGC to FIX, the <FLICKERLESS>
menu is not available.
● DIS (Digital Image Stabilization)
Digital Image Stabilization will set the anti-shake compensation.
※ If you set DIS to ON, the compensation area will be enlarged as set in the digital
zoom factor.
If you set the digital zoom factor to greater than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
● DAY/NIGHT
◇ DAY
Fixed to DAY mode, regardless of the scene.
◇ NIGHT
Fixed to NIGHT mode, regardless of the scene.
If BURST is set to <ON>, the burst signal will be output
long with the black and white composite video signal.
◇ AUTO
According to the luminance, this will switch DAY to NIGHT mode, or vice versa.
※ If you use an infrared light source while in AUTO mode, this may cause a failure in
AUTO SWITCH or AUTO FOCUS.