Sony MZ-R700DPC - Manual (Page 44)

44
Notes
• You cannot add track marks during synchro-recording.
• T MARK on the remote control does not function during playback.
Erasing a track mark
When you record with analog (line) input, unnecessary track marks
may be recorded where recording level is low. You can erase a track
mark to combine the tracks before and after the track mark. The track
numbers will change as follows.
1
While playing the track with the track mark you want to erase,
press X to pause.
2
Find the track mark by pressing . slightly.
For example, to erase the third track mark, find the beginning of
the third track. “00:00” appears in the display.
“MARK” appears in the display for 2 seconds.
1 3 4 2
1 3 2
Erase a track mark
Track numbers decrease
X
T MARK
X
.
T MARK .