Sunbeam HD7800 - Manual (Page 6)

Your 1800W Hairdryer with Diffuser has 2
heat and 2 speed settings. This combination
allows for greater versatility and control when
drying and styling your hair.
The switch marked with red numbers controls
the temperature of the airflow as follows:-
I = Low heat
II = Medium/High heat
The switch marked with blue numbers
controls the strength of the airflow as
follows:-
0 = Off
I = Gentle airflow
II = Strong airflow
A combination of high temperature and
strong airflow is ideal for fast drying. Lower
temperature and gentle airflow settings give
greater control when styling.
The cool shot button provides a burst of cool
air to set the style in place once styled.
To dry hair
• After shampooing and conditioning the
hair, squeeze excess moisture from your
hair using a dry towel.
• Comb hair free of all tangles with a wide
tooth comb.
• Plug your dryer into a power outlet and
turn the power on.
• Select the desired heat and speed
combination and using your fingers dry hair
from the roots to the ends.
• Use the concentrator nozzle onto specific
areas of hair for spot drying or styling
• To use the diffuser, remove the concentrator
nozzle and simply push on to the barrel of
the dryer.
• The diffuser is ideal to use on naturally
curly, wavy or permed hair.
• Always hold the dryer at least 30 cm away
from the hair when drying.
Warning: The diffuser may become hot
after extended use. Allow to cool before
removing from the dryer or storing.
Please refer to the enclosed Guide to Styling for
a step by step guide on how to achieve a range
of looks.
If you have any additional questions about using the 1800W Hairdryer with Diffuser,
please call the Sunbeam help line in Australia on 1 800 025 059. In New Zealand please call
09 912 0747.
4
Using your 1800W Hairdryer
with Diffuser
Help Line