Sony RDR-GX257 - Manual (Page 18)

18
You can change channels of the recorder using the
number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Step 6: Initial Setup
Make the basic adjustments by following the on-
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
1
Turn on the recorder and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The [LANGUAGE] display appears.
2
Select a language for the on-screen
displays using M/m, and press ENTER.
The [Clock Setting] display appears.
3
Set the date, year, and time using </M/
m/,, and press ENTER to start the clock.
You can also use the number buttons.
4
When the Initial Setup is completed, select
[Exit] and press ENTER.
If you use the cable box/satellite receiver
control, make the necessary settings and
check that the control works correctly
(page 19).
Changing channels of the recorder
using the remote
1 2 3
4 5 6
7 8 9
0
[/1
</M/m/,,
ENTER
O RETURN
TV [/1