Sony CMT-EP313 - Manual (Page 15)

O
ption
al Com
pon
ents
15 GB
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
A MD IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck, etc.) to
these jacks. You can then listen to the sound
from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See “Hooking up optional components” on
page 15.
2
Press MD.
Start playing the connected component.
Recording audio from a
connected component
1
Connect audio cords.
2
Start recording manually.
See “Recording on a tape manually” on
page 11.
Optional Components
Hooking up optional components
From the audio output
jacks of an optional
analog component
Optional analog component