Siemens HE2528U - Manual (Page 6)

Safety
English 2
• Remove all tape and packaging before using the range. Destroy the packag-
ing after unpacking the range. Never allow children to play with packaging
material.
• Do not repair or replace any part of the appliance unless specifically recom-
mended in the manuals. All other servicing should be done by a qualified
technician. This may reduce the risk of personal injury and damage to the
range.
• Never modify or alter the construction of a range by removing leveling legs,
panels, wire covers, anti-tip brackets/screws, or any other part of the product.
• DO NOT LIFT RANGE BY DOOR HANDLE.
• Remove the door for easier handling and installation. See ‘Removing Oven
Door’ in the Maintenance section of the Use and Care Manual.
• Do not use the warming drawer (if equipped) or oven for storage.
• Hidden surfaces may have sharp edges. Use caution when reaching behind
or under range.
Power Requirements and Electrical
Grounding Instructions
• If required by the National Electrical Code (or Canadian Electrical Code), this
appliance must be installed on a separate branch circuit.
• Only a power-supply cord kit rated for this appliance and marked "for use with
ranges" shall be used.
• Before installing, turn power OFF at the service panel. Lock service panel to
prevent power from being turned ON accidentally.
• Before you plug in an electrical cord, be sure all controls are in the OFF posi-
tion.
• Know how to disconnect the power to the range at the circuit breaker or fuse
box in case of an emergency.
• Installer - show the owner the location of the circuit breaker or fuse. Mark it for
easy reference.