Siemens MCM 1755 NTD - Manual (Page 16)

Color monitor MCM 1755 NTD
8 - English A26361-K472-Z100-2-5E19
•
The female/male receptacles of the cord set must meet CEE-22 requirements.
The receptacles will look as shown below.
•
The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will
appear on the outer sheath or on the insulation of one of the inner conductors.
•
For devices which are mounted on a desk or table, type SVT or SJT cable
sets may be used. For devices which sit on the floor, only SJT type cable sets
may be used.
•
The cable set must be selected according to the current rating for your device.