SIIG 04-0322B - Manual

1
Serial ATA 4-Channel PCI
Quick Installation Guide
04-0322B
Introducing the Serial ATA 4-Channel PCI
The Serial ATA 4-Channel PCI is an ultra high-speed four
channel Serial ATA controller for use in Pentium-class
computers. It achieves burst data transfer rates up to
150MB/s (1.5Gb/s) and supports various brand of hard
disk drives with capacities greater that 137GB.
Features and Benefits
• Compliant with Serial ATA Specification, rev 1.0
• Compliant with PCI Specification, revision 2.2
• Provides four independent channels to support up
to four Serial ATA drives
• Features independent 256-byte FIFOs per channel
for host reads and writes
• Co-exists with on-board Ultra ATA controller
• Features Watch Dog timer for fault resiliency
• Supports 32-bit wide PCI bus at 66MHz
• Lower pin count and voltage requirement, plus
better cabling over traditional Parallel ATA make
Serial ATA the controller of the future
System Requirements
• Pentium-class computer with one available PCI slot
• Windows 98/98SE/ME/NT 4.0/2000/XP/Server
2003
• CD-ROM drive (for driver installation)