Standard Horizon PHANTOM Series PS2000 - Manual (Page 56)

Phantom PS2000 Page 56
12.13 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ FOG FREQ ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select desired tone frequency.
5. Press the [CALL(SET)MENU] key.
6. Press the [CALL(SET)MENU] key to store the selected set-
ting.
7. Press the [16/9] key to return to radio operation.
12.14 EXTERNAL SPEAKER SELECTION
This selection allow the CMP25 RAM+ internal speaker to be turned off and so
an external speaker can be used. For connection of an external speaker refer
to page 11.
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ EXT SPK ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ on ” or “ of .”
“ on ”: EXT. speaker “on,” CMP25 RAM+ internal speaker “off”
“ oF ”: EXT. speaker “off,” CMP25 RAM+ internal speaker “on”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.