Symbol Technologies WS 2000 - Manual (Page 122)

A Field Office Example
Leo has three addresses for this switch. He plans to use one address for the traffic from each
of the subnets. He selects the More IP Addresses button and enters the other two IP
addresses:
He clicks Ok button in the address window, then the Apply button on the WAN window to
save his changes.
The next step is to set up the network address translations (NAT).
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 122
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004