Sharp DV-SL20U - Manual (Page 13)

– 13 – EN
PLAYING A DISC
Track Selection
Press DIRECT SKIP during playback.
• The FILE LIST will appear.
Select a desired track using Arrow ( L / K / B / s ).
• Press
B
when you want to go to the next hierarchy.
• Press
s
when you want to go back to the previous
hierarchy.
Press PLAY to start playing
NOTES:
• Press DIRECT SKIP to EXIT.
• Some selections may take a while to be recognized.
3
2
1
MP3
Press MODE twice while playback is stopped.
Press PLAY to play the tracks in random order.
2
1
MP3
Random Playback
This feature allows you to program a mp3 disc to play in a
desired sequence.
Press MODE during playback is stopped.
• The PROGRAM screen will appear.
Press K or L to select a track, then press ENTER,
to save it in a program.
• Press CLEAR to erase the incorrect input.
Press PLAY to start programmed playback. 3
2
1
MP3
Program
The DVD player allows you to select a language during DVD
disc (if multi language available) playback.
Press AUDIO during playback.
Press AUDIO repeatedly to select your desired
language.
NOTES:
• Pressing AUDIO cycles the sound mode through MAIN,
SUB, MAIN + SUB.
• DVD-RW discs recorded in double sound (two lan-
guages ) can be played back in either sound mode of
MAIN, SUB or MAIN + SUB.
• The sound mode cannot be changed during playback
of discs not recorded in double sound.
2
1
DVD-RW DVD
Audio Language
Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the (
) icon appears on the screen.
Press ANGLE during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
Press ANGLE repeatedly to select your desired angle. 2
1
DVD
Camera Angle
The DVD player allows you to select a language for subtitle
during DVD disc (if available) playback.
Press SUBTITLE during playback.
Press SUBTITLE repeatedly to select your desired
subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
To turn off subtitles, press SUBTITLE repeatedly
until OFF appears.
NOTES:
• Pressing AUDIO may not work on some DVDs with multiple
audio languages (e.g. DVDs which allow audio language set-
ting on the disc menu).
• Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
• If the desired language is not shown after pressing SUBTITLE
several times, the disc does not have subtitles in that language.
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, ‘---’ will be displayed instead. (Refer to page 15.)
3
2
1
DVD-RW DVD
Subtitle Language
Press AUDIO repeatedly during playback to select
between STEREO, L-CH or R-CH.
STEREO - both right and left channels are active (stereo)
L-CH - only left channel is active
R-CH - only right channel is active
NOTES:
• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
• Stereo sound mode will not be changed when playing DTS
CD.
1
CD
Stereo Sound Mode
You can check information about the current disc by pressing
ONSCREEN on the remote control.
Press ONSCREEN during play-
back to show current Chapter.
• The elapsed and remaining
playing time of the current
chapter will be displayed.
Press ONSCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
Press ONSCREEN again.
• The BIT RATE and the current repeat setting will be displayed.
• If you are playing a dual layered disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing).
If you are playing a DVD-RW with set-
ting the PLAYLIST, the following will
also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
Press ONSCREEN the fourth time to remove the display.
Press ONSCREEN during playback, the current
Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
Press ONSCREEN again to show current Total
Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
Press ONSCREEN again to remove the display. 3
2
1
CD
4
3
2
1
DVD-RW DVD
Changing the On-Screen Display
9/49 0:00:00 -0:00:00
IIII ORG T
VR mode
VR mode
VR mode