Spectra Watermakers VENTURA 150 MPC-5000 - Manual (Page 15)

15
Clark Pump Harness
Diversion
Valve.
Salinity Probe
Roto Flow meter.
The RotoFlow meter measures product flow. It is supplied with a three pin plug-in connector.
Plug it in to the RotoFlow cable and seal the connection with the supplied heat shrink tubing.
The salinity probe uses a telephone style jack and plug. Plug it in and slide the black plastic
boot over the sensor to waterproof the connection.
The diversion valve cable has two conductors. There is no polarity. Crimp the supplied heat
shrink butt connectors to the diversion valve leads and heat them to seal.
To Roto Flow Meter
To Diversion Valve
To Salinity Probe