Sea Frost BG 2000 - Manual (Page 29)

29
Follow the "re-make" instructions for Swagelok fittings.
Reminder: To ensure the total removal of moisture from the system use a high vacuum
pump, and evacuate the system with the highest possible plate temperature (100
degrees F.). A light bulb or heat lamp in contact with the plates is a good technique.
Recharge. Refer to "Recharging section"
MOISTURE IS A SYMPTOM. Carefully leak check the low side of the system if
moisture becomes a problem. Moisture leaks in!
CALL US WITH ANY QUESTIONS
INTERNATIONAL 603-868-5720
TOLL FREE IN THE UNITED STATES,
CANADA, AND CARIBBEAN
800-435-6708
FAX 603 868 1040
SHIPPING AND MAIL:
SEA FROST
372 ROUTE 4
BARRINGTON NH 03825
USA