Spalding M85544C - Manual (Page 17)

17 10/05 ID# M85544C
17. After pole has been secured to plate (2) loosen nut (26),
remove cotter pin (37), and pull out pin (36). This will
allow the removal of the assembly bolt (14) which is no
longer necessary for the remainder of the assembly and
installation of system.
35
37
36
24
26
14
25
ONLY AFTER THE ANCHOR
PLATE HAS BEEN FULLY
TIGHTENED: Remove cotter
pin (37) and pin (36) to
remove threaded assembly
rod (14) from anchor plate (2).
WARNING!